Tips for Checking the Health of Your Tires

Could it be time to replace your tires? Understand how to look for damage and evaluate your ground clearance. Having healthy tires allows you to drive with optimal safety. A thorough tire inspection allows you to be more aware of the current condition of your tires and detect any existing problems. You might be asking how to accomplish this correctly. Here are some tips for performing a tire inspection.

Check the tire pressure

The first thing to keep an eye on is the tire air pressure. Every month, tires lose around 1 pound per square inch. As a result, if you don’t take care of them, you may wind up with just a flat tire. Your vehicle is equipped with a TPMS device that alerts you if your tires for lincoln have a pressure that is currently too low or not. Use a tire pressure sensor to ensure that your tires are properly inflated.

Maintain Your Focus on the Road While Driving

If you feel a vibration when holding the car’s wheel, it might indicate that perhaps the wheel is not properly balanced. This may result in severe tire wear and tear. Request that your auto mechanic investigates the source of the vibrations.

Tire Inspection

Once a month, or before long car trips, inspect your tires for damage and deterioration. The penny test is a straightforward method for assessing wear. All you need is a Lincoln penny and three simple steps.

  1. Take a dime and place Abe’s body between your fingers and your thumb.
  2. Choose an area on the tire where the tread seems to be the thinnest, and insert the head into any of the holes.
  3. Unless the tread covers any portion of a penny’s head, you’re running with a safe and reasonable level of tread. If your tire tread falls below 2/3 of an inch, the car’s capability to handle the road is in bad condition.

Examine for damage

Looking for indicators of damage and wear is a great approach to determining whether your tires remain in great condition. If you notice that your tires have uneven tire degradation and poor wall health, it’s time to replace them. Examine the tires carefully and gently run your finger over the surface. Uneven tire wear is indicated by any anomalies in the pattern. You can alternatively moisten the tire and drive on a clean, smooth surface. The tire impressions left behind may reveal information about your tires’ current condition. Another indicator is the presence of vibrations when driving. This suggests that your tires are already unbalanced and need to be changed.

Tire Rotation

Rotating your tires is typically advised. Rotating them helps to level out the deterioration and can even improve their lifespan. This should be done every 6,000 to 9,000 miles at the very least. If in doubt, consult your vehicle’s owner’s manual or have your tires examined by a tire professional. Tire condition is an essential consideration while maintaining your vehicle.

Additional Dos and Don’ts

  1. Never combine tires from various manufacturers.
  2. Evaluate brake reactions and prevent heavy braking when driving.
  3. Avoid accelerating too rapidly since this might cause tire damage.
  4. If your tires often encounter terrible roads, examine the wheel alignment on a regular basis. Incorrect wheel alignment may reduce tire mileage.
  5. Inspect your tires for misalignment, which can cause them to wear out faster and make driving dangerous. 


You have various options for keeping your tires in good condition. Remember that good tires provide you with the finest driving performance available. Modern Lincoln automobiles, which are more efficient and safer than their predecessors, rely on well-maintained tires for lincoln to give a pleasant driving experience, safety, and enjoyment. With healthy tires, you can go further.

Comments are closed.